のねのBlog

パソコンやソフト開発で起きた問題など書きます。よろしくお願いします。

qemu help

>qemu-system-arm -help
QEMU emulator version 2.9.0 (v2.9.0-11661-gf61a662407-dirty)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
usage: qemu-system-arm [options] [disk_image]

'disk_image' is a raw hard disk image for IDE hard disk 0

Standard options:

Standard options:
-h or -help     display this help and exit

-version        display version information and exit

-machine [type=]name[,prop[=value][,...]]
                selects emulated machine ('-machine help' for list)
                property accel=accel1[:accel2[:...]] selects accelerator
                supported accelerators are kvm, xen, tcg (default: tcg)
                kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)
                vmport=on|off|auto controls emulation of vmport (default: auto)
                kvm_shadow_mem=size of KVM shadow MMU in bytes
                dump-guest-core=on|off include guest memory in a core dump (default=on)
                mem-merge=on|off controls memory merge support (default: on)
                igd-passthru=on|off controls IGD GFX passthrough support (default=off)
                aes-key-wrap=on|off controls support for AES key wrapping (default=on)
                dea-key-wrap=on|off controls support for DEA key wrapping (default=on)
                suppress-vmdesc=on|off disables self-describing migration (default=off)
                nvdimm=on|off controls NVDIMM support (default=off)
                enforce-config-section=on|off enforce configuration section migration (default=off)

-cpu cpu        select CPU ('-cpu help' for list)

-accel [accel=]accelerator[,thread=single|multi]
               select accelerator ('-accel help for list')
               thread=single|multi (enable multi-threaded TCG)-smp 
               [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
                set the number of CPUs to 'n' [default=1]
                maxcpus= maximum number of total cpus, including
                offline CPUs for hotplug, etc
                cores= number of CPU cores on one socket
                threads= number of threads on one CPU core
                sockets= number of discrete sockets in the system
-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node]
-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node]
-add-fd fd=fd,set=set[,opaque=opaque]
                Add 'fd' to fd 'set'
-set group.id.arg=value
                set <arg> parameter for item <id> of type <group>
                i.e. -set drive.$id.file=/path/to/image
-global driver.property=value
-global driver=driver,property=property,value=value
                set a global default for a driver property
-boot [order=drives][,once=drives][,menu=on|off]
      [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]
                'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
                'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
                'sp_time': the period that splash picture last if menu=on, unit is ms
                'rb_timeout': the timeout before guest reboot when boot failed, unit is ms
-m [size=]megs[,slots=n,maxmem=size]
                configure guest RAM
                size: initial amount of guest memory
                slots: number of hotplug slots (default: none)
                maxmem: maximum amount of guest memory (default: none)
NOTE: Some architectures might enforce a specific granularity
-mem-path FILE  provide backing storage for guest RAM
-mem-prealloc   preallocate guest memory (use with -mem-path)
-k language     use keyboard layout (for example 'fr' for French)
-audio-help     print list of audio drivers and their options
-soundhw c1,... enable audio support
                and only specified sound cards (comma separated list)
                use '-soundhw help' to get the list of supported cards
                use '-soundhw all' to enable all of them
-balloon none   disable balloon device
-balloon virtio[,addr=str]
                enable virtio balloon device (default)
-device driver[,prop[=value][,...]]
                add device (based on driver)
                prop=value,... sets driver properties
                use '-device help' to print all possible drivers
                use '-device driver,help' to print all possible properties
-name string1[,process=string2][,debug-threads=on|off]
                set the name of the guest
                string1 sets the window title and string2 the process name (on Linux)
                When debug-threads is enabled, individual threads are given a separate name (on Linux)
                NOTE: The thread names are for debugging and not a stable API.
-uuid %08x-%04x-%04x-%04x-%012x
                specify machine UUID
:

Block device options:

Block device options:
-fda/-fdb file  use 'file' as floppy disk 0/1 image
-hda/-hdb file  use 'file' as IDE hard disk 0/1 image
-hdc/-hdd file  use 'file' as IDE hard disk 2/3 image
-cdrom file     use 'file' as IDE cdrom image (cdrom is ide1 master)
-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]
          [,cache.direct=on|off][,cache.no-flush=on|off]
          [,read-only=on|off][,detect-zeroes=on|off|unmap]
          [,driver specific parameters...]
                configure a block backend
-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
       [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
       [,serial=s][,addr=A][,rerror=ignore|stop|report]
       [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]
       [,readonly=on|off][,copy-on-read=on|off]
       [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]
       [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]
       [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]
       [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]
       [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]
       [[,iops_size=is]]
       [[,group=g]]
                use 'file' as a drive image
-mtdblock file  use 'file' as on-board Flash memory image
-sd file        use 'file' as SecureDigital card image
-pflash file    use 'file' as a parallel flash image
-snapshot       write to temporary files instead of disk image files
-hdachs c,h,s[,t]
                force hard disk 0 physical geometry and the optional BIOS
                translation (t=none or lba) (usually QEMU can guess them)
-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
 [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
 [[,throttling.bps-total=b]|[[,throttling.bps-read=r][,throttling.bps-write=w]]]
 [[,throttling.iops-total=i]|[[,throttling.iops-read=r][,throttling.iops-write=w]]]
 [[,throttling.bps-total-max=bm]|[[,throttling.bps-read-max=rm][,throttling.bps-write-max=wm]]]
 [[,throttling.iops-total-max=im]|[[,throttling.iops-read-max=irm][,throttling.iops-write-max=iwm]]]
 [[,throttling.iops-size=is]]
-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
        [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
-virtfs_synth Create synthetic file system image
:

USB options:

USB options:
-usb            enable the USB driver (will be the default soon)
-usbdevice name add the host or guest USB device 'name'
:

Display options:

Display options:
-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
            [,window_close=on|off][,gl=on|off]

-display gtk[,grab_on_hover=on|off][,gl=on|off]|

-display vnc=<display>[,<optargs>]

-display curses

-display none                select display type

The default display is equivalent to
"-display gtk"
-nographic      disable graphical output and redirect serial I/Os to console
-curses         shorthand for -display curses
-no-frame       open SDL window without a frame and window decorations
-alt-grab       use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
-ctrl-grab      use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
-no-quit        disable SDL window close capability
-sdl            shorthand for -display sdl

-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]
       [,x509-key-file=<file>][,x509-key-password=<file>]
       [,x509-cert-file=<file>][,x509-cacert-file=<file>]
       [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6|unix]
       [,tls-ciphers=<list>]
       [,tls-channel=[main|display|cursor|inputs|record|playback]]
       [,plaintext-channel=[main|display|cursor|inputs|record|playback]]
       [,sasl][,password=<secret>][,disable-ticketing]
       [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]
       [,jpeg-wan-compression=[auto|never|always]]
       [,zlib-glz-wan-compression=[auto|never|always]]
       [,streaming-video=[off|all|filter]][,disable-copy-paste]
       [,disable-agent-file-xfer][,agent-mouse=[on|off]]
       [,playback-compression=[on|off]][,seamless-migration=[on|off]]
       [,gl=[on|off]][,rendernode=<file>]
   enable spice
   at least one of {port, tls-port} is mandatory

-portrait       rotate graphical output 90 deg left (only PXA LCD)

-rotate <deg>   rotate graphical output some deg left (only PXA LCD)

-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|virtio|none]
                select video card type

-full-screen    start in full screen

-vnc <display>  shorthand for -display vnc=<display>

-no-acpi        disable ACPI

-smbios file=binary
                load SMBIOS entry from binary file
-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
              [,uefi=on|off]
                specify SMBIOS type 0 fields
-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
              [,uuid=uuid][,sku=str][,family=str]
                specify SMBIOS type 1 fields
-smbios type=2[,manufacturer=str][,product=str][,version=str][,serial=str]
              [,asset=str][,location=str]
                specify SMBIOS type 2 fields
-smbios type=3[,manufacturer=str][,version=str][,serial=str][,asset=str]
              [,sku=str]
                specify SMBIOS type 3 fields
-smbios type=4[,sock_pfx=str][,manufacturer=str][,version=str][,serial=str]
              [,asset=str][,part=str]
                specify SMBIOS type 4 fields
-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]
               [,asset=str][,part=str][,speed=%d]
                specify SMBIOS type 17 fields
:

Network options:

Network options:
-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]
         [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-host=addr]
         [,restrict=on|off][,hostname=host][,dhcpstart=addr]
         [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,tftp=dir]
         [,bootfile=f][,hostfwd=rule][,guestfwd=rule]
                configure a user mode network backend with ID 'str',
                its DHCP server and optional services
-netdev tap,id=str,ifname=name
                configure a host TAP network backend with ID 'str'

-netdev socket,id=str[,fd=h][,listen=[host]:port][,connect=host:port]
                configure a network backend to connect to another network
                using a socket connection

-netdev socket,id=str[,fd=h][,mcast=maddr:port[,localaddr=addr]]
                configure a network backend to connect to a multicast maddr and port
                use 'localaddr=addr' to specify the host address to send packets from

-netdev socket,id=str[,fd=h][,udp=host:port][,localaddr=host:port]
                configure a network backend to connect to another network
                using an UDP tunnel

-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]
                configure a vhost-user network, backed by a chardev 'dev'

-netdev hubport,id=str,hubid=n
                configure a hub port on QEMU VLAN 'n'

-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
                old way to create a new NIC and connect it to VLAN 'n'
                (use the '-device devtype,netdev=str' option if possible instead)

-net dump[,vlan=n][,file=f][,len=n]
                dump traffic on vlan 'n' to file 'f' (max n bytes per packet)

-net none       use it alone to have zero network devices. If no -net option
                is provided, the default is '-net nic -net user'

-net [user|tap|bridge|socket][,vlan=n][,option][,option][,...]
                old way to initialize a host network interface
                (use the -netdev option if possible instead)
:
Character device options:
-chardev help

-chardev null,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay][,reconnect=seconds]
         [,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off]
         [,logfile=PATH][,logappend=on|off][,tls-creds=ID] (tcp)

-chardev socket,id=id,path=path[,server][,nowait][,telnet][,reconnect=seconds]
         [,mux=on|off][,logfile=PATH][,logappend=on|off] (unix)

-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
         [,localport=localport][,ipv4][,ipv6][,mux=on|off]
         [,logfile=PATH][,logappend=on|off]

-chardev msmouse,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
         [,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev ringbuf,id=id[,size=size][,logfile=PATH][,logappend=on|off]

-chardev file,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev pipe,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev console,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]

-chardev serial,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]
:

Device URL Syntax:

Device URL Syntax:
-iscsi [user=user][,password=password]
       [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
       [,initiator-name=initiator-iqn][,id=target-iqn]
       [,timeout=timeout]
                iSCSI session parameters

Bluetooth(R) options:

Bluetooth(R) options:
-bt hci,null    dumb bluetooth HCI - doesn't respond to commands
-bt hci,host[:id]
                use host's HCI with the given name
-bt hci[,vlan=n]
                emulate a standard HCI in virtual scatternet 'n'
-bt vhci[,vlan=n]
                add host computer to virtual scatternet 'n' using VHCI
-bt device:dev[,vlan=n]
                emulate a bluetooth device 'dev' in scatternet 'n'
:

TPM device options:

TPM device options:
-tpmdev passthrough,id=id[,path=path][,cancel-path=path]
                use path to provide path to a character device; default is /dev/tpm0
                use cancel-path to provide path to TPM's cancel sysfs entry; if
                not provided it will be searched for in /sys/class/misc/tpm?/device
:

Linux/Multiboot boot specific:

Linux/Multiboot boot specific:
-kernel bzImage use 'bzImage' as kernel image
-append cmdline use 'cmdline' as kernel command line
-initrd file    use 'file' as initial ram disk
-dtb    file    use 'file' as device tree image
:

Debug/Expert options:

Debug/Expert options:
-fw_cfg [name=]<name>,file=<file>
                add named fw_cfg entry with contents from file
-fw_cfg [name=]<name>,string=<str>
                add named fw_cfg entry with contents from string
-serial dev     redirect the serial port to char device 'dev'
-parallel dev   redirect the parallel port to char device 'dev'
-monitor dev    redirect the monitor to char device 'dev'
-qmp dev        like -monitor but opens in 'control' mode
-qmp-pretty dev like -qmp but uses pretty JSON formatting
-mon [chardev=]name[,mode=readline|control]
-debugcon dev   redirect the debug console to char device 'dev'
-pidfile file   write PID to 'file'
-singlestep     always run in singlestep mode
-S              freeze CPU at startup (use 'c' to start execution)
-realtime [mlock=on|off]
                run qemu with realtime features
                mlock=on|off controls mlock support (default: on)
-gdb dev        wait for gdb connection on 'dev'
-s              shorthand for -gdb tcp::1234
-d item1,...    enable logging of specified items (use '-d help' for a list of log items)
-D logfile      output log to logfile (default stderr)
-dfilter range,..  filter debug output to range of addresses (useful for -d cpu,exec,etc..)
-L path         set the directory for the BIOS, VGA BIOS and keymaps
-bios file      set the filename for the BIOS
-enable-kvm     enable KVM full virtualization support
-xen-domid id   specify xen guest domain id
-xen-create     create domain using xen hypercalls, bypassing xend
                warning: should not be used when xend is in use
-xen-attach     attach to existing xen domain
                xend will use this when starting QEMU
-no-reboot      exit instead of rebooting
-no-shutdown    stop before shutdown
-loadvm [tag|id]
                start right away with a saved state (loadvm in monitor)
-option-rom rom load a file, rom, into the option ROM space
-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
                set the RTC base and clock, enable drift fix for clock ticks (x86 only)
-icount [shift=N|auto][,align=on|off][,sleep=on|off,rr=record|replay,rrfile=<filename>,rrsnapshot=<snapshot>]
                enable virtual instruction counter with 2^N clock ticks per
                instruction, enable aligning the host and virtual clocks
                or disable real time cpu sleeping
-watchdog model
                enable virtual hardware watchdog [default=none]
-watchdog-action reset|shutdown|poweroff|pause|debug|none
                action when watchdog fires [default=reset]
-echr chr       set terminal escape character instead of ctrl-a
-virtioconsole c
                set virtio console
-show-cursor    show cursor
-tb-size n      set TB size
-incoming tcp:[host]:port[,to=maxport][,ipv4][,ipv6]
-incoming rdma:host:port[,ipv4][,ipv6]
-incoming unix:socketpath
                prepare for incoming migration, listen on
                specified protocol and socket address
-incoming fd:fd
-incoming exec:cmdline
                accept incoming migration on given file descriptor
                or from given external command
-incoming defer
                wait for the URI to be specified via migrate_incoming
-only-migratable     allow only migratable devices
-nodefaults     don't create default devices
-semihosting    semihosting mode
-semihosting-config [enable=on|off][,target=native|gdb|auto][,arg=str[,...]]
                semihosting configuration
-old-param      old param mode
-sandbox <arg>  Enable seccomp mode 2 system call filter (default 'off').
-readconfig <file>
-writeconfig <file>
                read/write config file
-nodefconfig
                do not load default config files at startup
-no-user-config
                do not load user-provided config files at startup
-trace-unassigned
                Trace unassigned memory or i/o accesses
-trace [[enable=]<pattern>][,events=<file>][,file=<file>]
                specify tracing options
-msg timestamp[=on|off]
                change the format of messages
                on|off controls leading timestamps (default:on)
-dump-vmstate <file>
                Output vmstate information in JSON format to file.
                Use the scripts/vmstate-static-checker.py file to
                check for possible regressions in migration code
                by comparing two such vmstate dumps.
:

Generic object creation:

Generic object creation:
-object TYPENAME[,PROP1=VALUE1,...]
                create a new object of type TYPENAME setting properties
                in the order they are specified.  Note that the 'id'
                property must be set.  These objects are placed in the
                '/objects' path.

During emulation, the following keys are useful:
ctrl-alt-f      toggle full screen
ctrl-alt-n      switch to virtual console 'n'
ctrl-alt        toggle mouse and keyboard grab

When using -nographic, press 'ctrl-a h' to get some help.